Guide

How Much to Reupholster a Wingback Chair

Updated on · By the Deer Circus team

Reupholstering a wingback chair usually costs a few hundred dollars, with fabric as the biggest variable. Labor runs roughly 4 to 8 hours per chair, and the final bill depends on the fabric you choose and what the frame needs.

On this page (9 sections)
  1. What is the typical cost to reupholster a wingback chair?
  2. What changes the price from one shop to the next?
  3. How much fabric does a wingback chair need?
  4. What add-on costs should you expect?
  5. How do you know reupholstering is worth it?
  6. Can cleaning save you a reupholstery bill?
  7. Should you attempt the job yourself?
  8. How do you get a fair quote?
  9. What's the bottom line on reupholstery cost?

Reupholstering a wingback chair usually costs a few hundred dollars, with fabric as the biggest variable. Labor runs roughly 4 to 8 hours per chair, and the final bill depends on the fabric you choose and what the frame needs.

A wingback is a frame-heavy chair, so the work goes beyond swapping a cover. The curves, wings and buttoned back take time to fit and finish.

That's why how much to reupholster a wingback chair varies so much from shop to shop.

What is the typical cost to reupholster a wingback chair?

Expect a few hundred dollars for labor alone, before fabric. A small shop or a self-employed upholsterer typically sits at the lower end.

A busy metropolitan shop with a designer clientele sits higher.

The fabric is separate and often the largest line on the invoice. Basic upholstery fabric costs far less than designer cloth, and a wingback needs enough yardage to cover the back, wings, arms and seat.

A typical wingback needs about 5 to 7 yards of 54-inch fabric, though the exact amount depends on the pattern repeat and whether the cushions are separate.

Trim, buttons, foam and staples are small items but they add up. If the shop supplies them, expect them folded into the labor quote.

Ask whether the number you're given includes materials or only the hours.

Chair size matters too. A slim wingback chair needs less fabric and less fitting time than a deep club version.

Get two quotes when you can, and compare what each one includes.

What changes the price from one shop to the next?

Labor rate is the first driver, and it swings widely by region and by shop type. An upholsterer working from a small workshop usually charges less per hour than a full-service furniture repair business.

The second driver is the state of the chair. A solid frame needs stripping and recovering.

A frame with a cracked leg, a loose joint or a broken spring adds repair time before any fabric goes on.

Third is the fabric decision. Fabric with a large repeat wastes more yardage, and stripes or plaids need pattern matching on every piece.

That matching takes skill and time, so shops often charge more for it.

Fourth is the finishing detail. Nailhead trim, welting and buttoned backs all add handwork.

A plain fabric back is the cheapest option, while a buttoned or tufted back is the most labor-heavy.

How much fabric does a wingback chair need?

Budget for about 5 to 7 yards of 54-inch upholstery fabric for a standard wingback with separate cushions. Chairs with a tight back or a smaller frame can need less.

Plain fabric in a small repeat needs the least yardage. A large floral or geometric repeat needs more so the pattern lines up across seams.

Add a yard or two if you want the cushions covered in the same cloth as the frame.

Pattern matching on stripes and checks is the hidden cost. The shop may quote more fabric and more labor for the same chair simply because the cloth needs careful alignment.

If you supply your own fabric, buy from a reputable upholstery supplier and check the width and repeat. Measure the chair before you order, and keep a little extra in case of a cutting error.

What add-on costs should you expect?

Foam replacement, frame repair and trim are the main extras. Seat foam goes flat long before the fabric wears out, so a shop may suggest new foam while the chair is open.

New foam is worth it when the seat sags or feels thin. A fresh cushion changes comfort more than a new cover does, so ask the shop to check the foam condition before quoting.

Frame repair covers glue, dowels and sometimes new webbing or springs. A wobbly leg or a creaking joint is a sign the frame needs attention.

Trim and buttons are small but visible costs. Nailhead trim, piping and covered buttons are priced per item or as part of the labor estimate.

Ask for the trim cost as a separate line so you can decide.

How do you know reupholstering is worth it?

Reupholstering makes sense when the frame is solid and the chair is good quality. A well-built frame with hardwood joints can outlast the fabric several times over, so a recover gives you a fresh-looking chair for a fraction of a new one.

It also makes sense when the chair fits the room. A wingback with the right proportions for your reading corner is hard to replace at a similar build quality.

Our guide to whether wingback chairs are comfortable can help you decide if the shape itself works for you.

Reupholstering is less attractive when the frame is broken or the chair is a low-cost flat-pack piece. Repair and labor can exceed the value of the chair.

In that case, a new wingback accent chair may be the better spend.

Sentimental value counts too. A chair passed down in the family often justifies the cost even when the numbers don't.

Can cleaning save you a reupholstery bill?

Sometimes yes, when the fabric is intact and only soiled. A chair with surface stains and no wear can often be cleaned and kept rather than recovered.

A good cleaner and a soft brush can lift everyday marks without touching the frame.

The kanfort foam is a no-rinse cleaner for fabric upholstery. It's formulated to break down stains like soda, wine and coffee, and it's gentle enough for households with kids and pets.

For a leather wingback, a dedicated leather product is the better choice. Mr.

Leather cleans, shines and protects leather and vinyl, and it moisturizes to help stop cracking.

The BFWood brush has soft boar bristles for working a cleaner into fabric. Its curved handle gives a firm grip, and the soft bristles won't pill delicate cloth the way a stiff brush can.

Cleaning buys you time, but it won't fix worn fabric or flat foam. When the cloth is thin or the seat sags, reupholstering is the real answer.

A cleaning pass first is still smart, because a clean chair photographs and quotes better.

Should you attempt the job yourself?

DIY is possible but hard on a wingback. The wings, curved arms and buttoned back are the parts that trip up first-timers.

Professional upholsterers train on exactly these shapes.

Doing it yourself can save the labor cost. You'd still buy fabric, foam and supplies, and you'd need tools like a staple gun, a tack lifter and a sewing machine for piping.

The savings shrink once you price the tools.

Our guide to how to make a wingback chair covers the build from the frame up. If you already have the tools and patience, that's the place to start.

If the chair has a complex back or you want a smooth result, a professional is the safer spend. A poor recover can cost more than the original quote once you pay to fix it.

How do you get a fair quote?

Get two or three quotes and ask each one what's included. A quote that covers labor only will grow once fabric and foam are added.

Compare like with like.

Bring the chair in or send clear photos of the frame, seat, arms and any damage. A shop that sees the wear spots gives a more accurate estimate than one working from a description.

Ask about the timeline, the payment schedule and what happens if the shop finds frame damage. A good shop flags extras before starting, not after.

Finally, ask whether they'll work with your fabric and what warranty they offer on the labor. That last point matters as much as the price when you're paying for a recover.

What's the bottom line on reupholstery cost?

Reupholstering a wingback chair is usually a few hundred dollars plus fabric, and it's worth it when the frame is solid. The chair you save is often better built than the one you'd buy to replace it.

If the fabric is only dirty, try cleaning first. The kanfort foam, Mr.

Leather spray and BFWood brush cover fabric and leather wingbacks and cost far less than a recover. Pick cleaning when the cloth and foam are sound; pick reupholstery when the fabric is worn or the seat is flat.

For the full picture of the chair type before you decide, see what a wingback chair is.

Frequently asked questions

Is reupholstering a wingback chair cheaper than buying a new one?

It can be, especially when the frame is solid and the chair has sentimental value. Compare a quote plus fabric against a new chair of similar build; a simple frame with basic fabric often comes out lower.

How long does reupholstering a wingback chair take?

Most shops quote a few days to a few weeks. The schedule depends on the shop's workload, fabric arrival and whether frame repairs are needed, so ask for a timeline before you commit.

Can I supply my own fabric to save money?

Many upholsterers accept customer fabric and charge labor only. Ask first, because some shops only work with fabric they source and warranty; expect a waiver on fabric you bring.

Should I try cleaning the chair before reupholstering it?

Yes, if the fabric is intact and only dirty. A foam or leather cleaner and a soft brush can lift surface stains, which may save you a full reupholstery bill when the frame and cushions are still sound.

How do I get an accurate reupholstery quote?

Bring the chair to the shop or send clear photos of the frame, cushions and wear spots. A quote based on photos alone is an estimate; ask what the final bill includes and what triggers extra charges.